Encrypt Btrfs on multiple drives (for arch)
Introduction Imagine a situation where you have a laptop with two or more drives. Since it’s...
Use DHCP and SLAAC on Proxmox
By default, during the installation of Proxmox a static IPv4 Address has to be configured. However...
Configure Docker for IPv6
This article describes how to configure docker in order to use IPv6.
Intel iGPU Passthrough using GVT-g on Proxmox
In this blog post I show you how to configure your host so that you can use a virtual Intel iGPU inside your guests on Proxmox.
Proxmox networking setup in a Hetzner data center with IPv6
The article discusses to procedure to enable IPv6 networking on Proxmox on in a Hetzner datacenter.
Proxmox firewall setup
This article shows a minimal configuration for the firewall included in proxmox.
Dev-Log Connect 6 Coding Competition – MiniMax Algorithm
This Post describes the principle behind the MiniMax-Algorithm that will be used to program the Connect6 KI for the Coding Competition.
Dev-Log Connect 6 Coding Competition – First Thoughts
This article discusses some of my thoughts while preparing for the competition and what technique I’ll be using as a basis for my KI.
Proxmox PCIe passthrough
This article shows how to passthrough any PCIe Device to a virtual machine. A GPU is used as an example.
Hosting a Connect6 Coding Competition
This article is about hosting a coding competition where each team develops a KI. In the End all KIs play against each other.